Boeing 757-200

Tags:  flying 

airborne 

boeing 

airliner 

aeroplane 

delta 

aircraft 

jet 

commercial 

fuselage 

757 

flaps 

757-200 

boeing757-200 

vehicle 

plane 

wing 

narrow-body 

winglets 

ailerons 

boeing757 

Model's Description:
Boeing 757-200 3D Model, Optimized by RigModels.com, Fully textured with UV Mapping and materials. Download Boeing 757-200 in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
3D model of the Boeing 757-200; in ground position, with winglets, Pratt & Whitney engines, and the alternate two over-the-wing emergency exits configuration. The Boeing 757 is an American-made, short, medium, and long-range, narrow-body commercial aircraft. It first entered service in 1983, meant to replace the Boeing 727. The production of the 757 ended on October 28, 2004 after 1,050 units had been built. The 757-200, the original version of the aircraft, is the most widely ordered version of the 757. The 757-300, the stretched version, is the longest narrow-body twinjet ever produced. The 757 can be considered one of Boeing’s most successful models. However, sales fell in the late 90s, causing production to cease. Demand for the 757-200 was continued, primarily due to its usefulness on routes between New York and Western Europe. Specifications: Length 155 ft 3 in / 47.3 m Height 44 ft 6 in / 13.6 m Wingspan 124 ft 10 in / 38.0 m (with no winglets) 3D Model is ready to download for free, this model contains 2029973 polygons.

 Boeing B-52 Stratofortres

Tags:  boeing 

usaf 

bomber 

b52 

stratofortress 

b-52 

military-aircraft 

Model's Description:
Boeing B-52 Stratofortress 3D Model, Optimized by RigModels.com, Fully textured with UV Mapping and materials. Download Boeing B-52 Stratofortress in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Boeing B-52 Stratofortress is an American long-range, subsonic, jet-powered strategic bomber. The B-52 was designed and built by Boeing, which has continued to provide support and upgrades. It has been operated by the United States Air Force (USAF) since the 1950s. The bomber can carry up to 70,000 pounds (32,000 kg) of weapons, and has a typical combat range of around 8,800 miles (14,200 km). The B-52 took its maiden flight in April 1952. Built to carry nuclear weapons for Cold War–era deterrence missions, the B-52 Stratofortress replaced the Convair B-36 Peacemaker. A veteran of several wars, the B-52 has dropped only conventional munitions in combat. The B-52 has been in service with the USAF since 1955. There are 72 aircraft in inventory as of 2022. It completed 60 years of continuous service with its original operator in 2015. After being upgraded between 2013 and 2015, the last airplanes are expected to serve into the 2050s. 3D Model is ready to download for free, this model contains 16616 polygons.

 Boeing RC-135 U Combat Se

Tags:  boeing 

usaf 

sam 

radar 

707 

p8 

awacs 

e4 

usa 

kc135 

rc135 

stratolifter 

stratotanker 

Model's Description:
Boeing RC-135 U Combat Sent 3D Model, Optimized by RigModels.com, Fully textured with UV Mapping and materials. Download Boeing RC-135 U Combat Sent in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The RC-135U Combat Sent provides strategic electronic reconnaissance information to the president, secretary of defense, Department of Defense leaders, and theater commanders. Locating and identifying foreign military land, naval and airborne radar signals, the Combat Sent collects and minutely examines each system, providing strategic analysis for warfighters. Collected data is also stored for further analysis by the joint warfighting and intelligence communities. The Combat Sent deploys worldwide and is employed in peacetime and contingency operations. 3D Model is ready to download for free, this model contains 112192 polygons.

 Sukhoi checkmate T-75 LTS

Tags:  stealth 

f35 

fighter-jet 

sukhoi 

sukhoi-pak-fa 

checkmate 

lts 

t75 

su-75 

su75 

Model's Description:
Sukhoi checkmate T-75 LTS 3D Model, Optimized by RigModels.com, Fully textured with UV Mapping and materials. Download Sukhoi checkmate T-75 LTS in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Russian multifunctional fighter of the fifth generation, created in the OKB named after P.O. Sukhoi. The aircraft is being developed for delivery to the Russian Aerospace Forces, as well as for export to the countries of the Middle East, Asia-Pacific region, Latin America and India, as a multifunctional platform of a new generation, which is distinguished by the ability to adapt to the needs of a particular customer, and as an alternative to the Su-57 heavy fighter 3D Model is ready to download for free, this model contains 37111 polygons.